EasyManua.ls Logo

HP ProLiant s6500 Chassis User Manual

HP ProLiant s6500 Chassis
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
HP ProLiant s6500 Chassis
Setup and Installation Guide
Abstract
This guide describes the setup, configuration, and usage of the HP ProLiant s6500 Chassis.
Part Number: 653239-005
June 2014
Edition: 5

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the HP ProLiant s6500 Chassis and is the answer not in the manual?

HP ProLiant s6500 Chassis Specifications

General IconGeneral
Maximum Number of Nodes8
CoolingHot-plug fans
Rack Units4U
ManagementHPE iLO
Product TypeServer Chassis
Expansion SlotsVaries by server node
CompatibilityHP ProLiant
Form FactorRack-mountable

Summary

Planning the Installation

Features

Summarizes the capabilities of the HP ProLiant SL chassis, including server support and efficiency.

Grounding Requirements

Details the necessity of connecting the equipment to protective earth for safety.

Space and Airflow Requirements

Outlines the necessary clearances around the rack for servicing and proper cooling.

Configuration Rules

Identifying Components and LEDs

Front Panel Components

Identifies the slot numbering and components on the front of the s6500 chassis.

Rear Panel Components

Lists and identifies components and their locations on the rear panel.

Rear Panel LEDs and Buttons

Details the status indicators (LEDs) and buttons on the rear panel and their meanings.

Redundant System Fan Configuration

Illustrates the device numbers for the 16 system fans located on the rear panel.

Installing Components

System Fans

Discusses the eight system fans and includes a caution about mixing fan types.

Power Supplies

Describes the location and types of power supplies and notes that wattages cannot be mixed.

Removing the PSU Backplane

Provides step-by-step instructions for removing the PSU backplane from the chassis.

Installing the PSU Backplane

Offers detailed steps for installing the PSU backplane and connecting cables.

Removing the Power Supply

Explains how to remove a power supply unit from its bay.

Installing the Power Supply

Guides users on how to install a power supply, including airflow and wattage mixing cautions.

Rack Options

Installing the 4U Rack Kit

Details the process of installing a 4U rack kit, including safety warnings and steps.

Installing the 4U POD Rail Kit

Provides instructions for installing the 4U POD rail kit into the rack.

Installing the 4U Third-Party Rail Kit

Outlines the steps for installing a 4U third-party rail kit.

Installing the Chassis Handles Kit

Describes how to install the chassis handles for easier movement and installation.

Installing the Half-Width Node Blank

Guides the installation of half-width node blanks into the chassis slots.

Installing the Full-Width Node Blank

Explains how to install a full-width node blank into the chassis.

Removing the Center Wall

Details the procedure for removing the center wall to support full-width trays.

Cabling

Hardware Installation

Covers the installation of scalable system hardware within a rack.

Rack Types and Configurations

Discusses compatibility with different rack types like HP, third-party, and Telco.

Rack Compatibility

Specifies the rack depth requirements and compatibility for the s6500 chassis.

Cable Management for Third-Party Racks

Offers recommendations for managing cables in third-party racks.

Optional Installation Services

Describes HP Care Pack services for server support and maintenance.

Optimum Environment

Covers environmental considerations for server installation, including temperature.

Temperature Requirements

Details acceptable ambient operating temperatures and cautions regarding airflow.

Power Requirements

Discusses compliance with electrical regulations for IT equipment installation.

Electrical Grounding Requirements

Explains the grounding requirements based on national and international electrical codes.

Installation Guidelines

Provides general guidelines for installing the scalable system in racks, including safety.

Cabling Guidelines

Offers safety and best practice guidelines for connecting scalable system cabling.

Installation Overview for Full-Rack Solutions

Provides a recommended order for hardware installation and cable connections in full racks.

Power Cabling

Power Requirements and Considerations

Covers power input requirements for server supplies and PDUs.

PDU Support

Discusses HP's recommendations for using PDUs and supported mPDUs.

Extension Bar Support

Explains the use of extension bars for distributing power from PDUs.

Power Cabling Configurations

Lists various power cabling configurations for multiple and single racks.

mPDU and Fixed-Cord Extension Bar Configuration

Illustrates a 42U rack configuration with mPDUs and extension bars.

Power Cabling with Extension Bars

Demonstrates power cabling using extension bars, highlighting benefits.

Power Cabling with Y-Cables

Explains the use of Y-cables for connecting multiple power supplies to a single PDU outlet.

Bottom-Mounted mPDU and Fixed-Cord Extension Bar Configuration

Shows a rack configuration with bottom-mounted mPDUs and extension bars.

Power Cabling with Y-Cables and Bottom-Mounted PDU

Illustrates power cabling using Y-cables with bottom-mounted PDUs.

Network Cabling

Network Adapter and Switch Support

Covers network adapter support and recommendations for switch placement.

Network Cabling Configurations

Introduces different network cabling configurations.

Network Cabling with Ethernet Switches

Details network cabling using Ethernet switches and cable routing.

Network Cabling with InfiniBand Switches

Explains network cabling using InfiniBand switches and cable routing.

Using the HP Advanced Power Manager

HP APM Overview

Provides an overview of HP Advanced Power Manager and its role in administration.

Best Practices

Three-Phase Balancing

Discusses optimal phase balancing criteria and practices for the chassis.

3+1 Redundant Mode and 4 Single-Ended Nonredundant Mode

Explains how to cable the chassis for single-ended configurations.

Support and Other Resources

Before You Contact HP

Lists information required before contacting HP support.

HP Contact Information

Provides contact details for HP support in the United States and worldwide.

Acronyms and Abbreviations

Documentation Feedback

Index

Related product manuals