Adjustment Range (*default) Description
voltage. (There is currently no known
defect associated with this adjustment.)
Transfer belt voltage – C Off*/–5 to +5 This adjustment allows fine control of the
Cyan station OPC-to-ITB transfer
voltage. (There is currently no known
defect associated with this adjustment.)
Transfer belt voltage – K Off*/–5 to +5 This adjustment allows fine control of the
Cyan station OPC-to-ITB transfer
voltage. (There is currently no known
defect associated with this adjustment.)
NOTE: You must click the Apply button before your changes will take effect.
Figure 1-8 HP Color LaserJet CP1210 Series Toolbox — Print Quality screen
Table 1-3 Optimize Modes — Optimize menu (continued)
ENWW HP Color LaserJet CP1210 Series Toolbox 19
Purpose and scope
To Next Page
Loading...