Print Density
Use the Print Density settings to make fine adjustments in the amount of each color of toner that is
used for your printed documents.
●
Contrasts. The range of difference between light (highlight) and dark (shadow) colors. To increase
the overall range between light and dark colors, increase the Contrasts setting.
●
Highlights. Colors that are nearly white. To darken highlight colors, increase the Highlights
setting. This adjustment does not affect midtone or shadow colors.
●
Midtones. Colors that are halfway between white and solid density. To darken midtone colors,
increase the Midtones setting. This adjustment does not affect highlight or shadow colors.
●
Shadows. Colors that are nearly solid density. To darken shadow colors, increase the Shadows
setting. This adjustment does not affect highlight or midtone colors.
●
Restore defaults. Select to reset all of the density settings to the factory settings.
Figure 1-9 HP Color LaserJet CP1210 Series Toolbox — Print Density screen
20 Chapter 1 Purpose and scope ENWW
To Next Page
Loading...