Print Modes
Use the Print Modes page to customize the fuser and transfer settings for specific paper types and help
resolve persistent print-quality problems.
NOTE: HP recommends that you change these settings only if an HP customer support person advises
you to.
Figure 1-10 HP Color LaserJet CP1210 Series Toolbox — Print Modes screen
Table 1-4 Print Modes — Fusing
Fusing Adjustments Range (*default) Description
Paper curl – up Off*/On This setting optimizes fuser temperature
for paper with the ends curled up in the
output tray.
Paper curl – down Off*/On This setting optimizes fuser temperature
for paper with the ends curled down in
the output tray.
Flap sealing Off*/On This setting reduces fuser temperature
for envelope print modes to reduce flab
sealing.
Less/More fusing Off*/–2 to +2 These settings give four levels of direct
control of fuser temperature.
ENWW HP Color LaserJet CP1210 Series Toolbox 21
Purpose and scope
To Next Page
Loading...