on the left illustrates the output when the Scale to Fit check box is selected, and the image on the right
illustrates the output when the Scale to Fit check box is not selected.
Figure 3-11 Preview images - Legal on Letter; Scale to Fit off (left) and on (right)
When the size for which the document is formatted (that is, the logical size) differs from the target size,
the preview image uses a dashed gray line to show the boundaries of the logical page in relation to the
target page size.
% of Normal Size
The % of Normal Size option provides a slider bar to use for scaling the percentage setting. The default
setting in the entry box is 100% of normal size. Normal size is defined as the paper size that is selected
within the driver or what the driver receives from the software program (if the software program does
not negotiate the paper size with the driver). The driver scales the page by the appropriate factor and
sends it to the device.
The limits of the range are from 25% to 400%, and any values outside the range are adjusted to those
limits as soon as the focus is removed from the control (that is, when the Tab key is pressed or another
control is selected). Any change to the scale also changes the page preview image.
The slider bar controls the scale directly. The value in the edit box changes as the scroll bar indicator
is dragged, and the preview image is updated to the new image scale. Each click on the slider bar affects
the scale by 75%.
The following settings disable the % of Normal Size option:
●
The Print Document On check box (on the Effects tab) is selected.
●
The Pages per Sheet drop-down list value (on the Finishing tab) is not 1.
Watermarks
Use the Watermarks feature to select a watermark, create a custom watermark (text only), or edit an
existing watermark. The following watermarks are preset in the driver:
●
Confidential
●
COPY
●
Draft
●
SAMPLE
80 Chapter 3 HP Color LaserJet CP1210 Series print driver (Host-based raster driver) ENWW
To Next Page
Loading...