The drop-down menu shows alphabetically sorted watermarks that are currently available on the system,
plus the default setting "(none)", which indicates that no watermark is selected. Any selected watermark
appears in the preview image.
When the First Page Only check box is selected, the watermark is printed only on the first page of the
document. The First Page Only check box is disabled when the current watermark selection is "(none)".
Watermarks are applied to logical pages. For example, when the Pages per Sheet drop-down list value
is set to "4" and the First Page Only check box is cleared, four watermarks appear on the page (one
on each logical page).
Click the Edit button to open the Watermark Details dialog box.
Figure 3-12 Watermark Details dialog box
Click the OK button to accept all of the changes that are made in the Watermark Details dialog box.
Clicking the Cancel button does not cancel all of the changes. If you make changes to a watermark and
then select a different watermark or click the New button, all of the changes made to the previous
watermark are saved, and only the current, unsaved changes can be canceled.
Current Watermarks
The Current Watermarks group box contains a list of available predefined and newly create
watermarks.
To create a new watermark, click the New button. The new watermark show as "Untitled" until you name
it. To name it, type text in the Watermark Message field. The name in the Watermark Message field
doubles as the watermark name.
Watermark names appear on the Effects tab as well as in the Watermark Details group box.
NOTE: When the limit of 30 watermarks is reached, the New button is disabled.
To edit an existing watermark, select the watermark in the Current Watermarks list. If you change the
Watermark Message for that watermark, you are, in effect, creating a new watermark.
ENWW Effects tab features 81
HP Color LaserJet
CP1210 Series Print
Driver
To Next Page
Loading...