Finishing tab features
Use the Finishing tab to print booklets and control the media output. The following illustration shows
the Finishing tab.
Figure 3-13 Finishing tab
Document Options
Print on Both Sides (Manually)
NOTE: The Print on Both Sides (Manually) check box is unavailable if the Allow Manual
Duplexing option is disabled on the Configure tab in the Properties tab set.
The default setting for the Print on Both Sides (Manually) check box is cleared (not selected). Selecting
the Print on Both Sides (Manually) check box makes the Flip Pages Up check box and the Booklet
Printing drop-down list available.
When a print job is sent to the device with the Print on Both Sides (Manually) check box selected, the
even pages print, and then the following dialog box appears with instructions to complete the manual
duplex process.
84 Chapter 3 HP Color LaserJet CP1210 Series print driver (Host-based raster driver) ENWW
To Next Page
Loading...