6. Disconnect six connectors (callout 11).
NOTE: Disconnect the larger connector on the right side from the bottom. Disconnect the two
smaller connectors on the right side from the top.
Figure 6-165 Remove the laser/scanner assembly (Y/M) (6 of 12)
11
7. Release two tabs (callout 12), and then slide the fan assembly toward the power-supply side of the
product to release it.
Figure 6-166 Remove the laser/scanner assembly (Y/M) (7 of 12)
12
268 Chapter 6 Removal and replacement ENWW
To Next Page
Loading...