HP D8911 - Technical Specifications

d8911-us.fm Page 11 Monday, December 17, 2001 5:11 PM
HP 19” Color Monitor User’s Guide
Technical Specifications
Technical Specifications
PICTURE TUBE
Size 19-inch flat square tube
18.0-inch viewable image (353mm)
Phosphorous Red, Green, Blue P22 (medium short
persistence)
Dot pitch 0.26mm (0,28mm)
Face Plate Anti-glare, anti-static, screen coating
INPUT SIGNAL
Video 0.7V p p analog RGB
Synchronization TTL level separate synchronization
(negative/positive)
INTERFACE
Input Connector 15-pin mini D-SUB
SCANNING FREQUENCY
Horizontal 30 to 95 kHz
Vertical 50 to 160 Hz
DISPLAY SIZE
366 x 273 mm ±1mm maximum viewable size
MAX RESOLUTION
RECOMMENDED
RESOLUTION
1600 x 1200 (75Hz)
1280 x 1024 (85 Hz)
WARM-UP TIME
30 minutes to reach optimum performance level
PIXEL CLOCK
203 MHz
POWER SOURCE
AC 100 to 240 V, 50 to 60Hz
Current 1.5 A (1,5A)
OPERATING
ENVIRONMENT
Temperature
0
°
C to 40
°
C
Humidity 10% RH through 80% RH (without
condensation)
CABINET DIMENSIONS
466 (H)
×
460(W)
×
470(D) mm (including pedestal)
WEIGHT
20Kg
TILT/SWIVEL STAND
Tilt Angle - 5
°
to +12.5
°
Swivel Angle ±45
°
English 11