HP dc5000 - Microtower PC - Removing the Computer Access Panel and Front Bezel

2–2 www.hp.com Hardware Reference Guide
Hardware Upgrades
Removing the Computer Access Panel and
Front Bezel
To remove the computer access panel:
1. Turn off the computer properly through the operating system and
turn off any external devices.
2. Disconnect the power cord from the power outlet 1 and the
computer 2, and disconnect any external devices.
Disconnecting the Power Cable
Ä
CAUTION: Before removing the computer access panel, ensure that the
computer is turned off and that the power cord is disconnected from the
electrical outlet.