HP Designjet 111 series User Manual

10 Ink-system issues
All ink cartridge icons in the front panel are flashing
1. Remove all the ink cartridges. See Replace ink cartridges on page 26.
2. Return them one by one to their normal locations, making sure that each is firmly seated in the
proper position.
3. If the corresponding icon stops flashing, that cartridge is OK.
4. If the icon continues to flash, replace the cartridge with a new one.
One ink cartridge icon in the front panel is flashing
1. Remove the ink cartridge in question. See Replace ink cartridges on page 26.
2. Return it to its normal location, making sure that it is firmly seated in the proper position.
3. If the icon stops flashing, the cartridge is OK.
4. If the icon continues to flash, replace the cartridge with a new one.
All printhead icons in the front panel are flashing
Replace all the printheads. See Replace printheads on page 27.
One printhead icon in the front panel is flashing
Replace the printhead in question. See Replace printheads on page 27.
38 Chapter 10 Ink-system issues ENWW
Ink issues

HP Designjet 111 series Specifications

General

Model	HP Designjet 111 series
Category	Printer
Product Type	Large Format Printer
Print Technology	Thermal Inkjet
Print Resolution (black)	1200 x 600 dpi
Maximum Print Size	A1
Maximum Print Width	24 inches
Media Types Supported	Bond paper, Coated paper, Photo paper, Plain paper, Tracing paper
Media Sizes Supported	A4, A3, A2, A1
Connectivity	USB 2.0
Ink Cartridges	4 (black, cyan, magenta, yellow)
Operating Systems Supported	Windows and Mac OS