8-49
Removal and Installation
HP Designjet 4500 Printer Series Service Manual
APS Assembly
Removal
Switch off the product and remove the power cable.
1. Remove the Left Cover
⇒
Page 8-6
.
2. Remove the Left Connector Cover
⇒
Page
8-26
.
3. Remove the ISS
⇒
Page 8-47.
4. Release the Air Tube from the Slot in the Ink
Supply Station.
5. Unclip the APS Assembly from the Ink
Supply Station.
6. Remove the APS Assembly from the Ink
Supply Station.
1
2
To Next Page
Loading...
