HP DesignJet 500 - Table 2-2. Required Equipment; Table 2-3. Recommended Screw Torques

HP Omnibook 500 Removal and Replacement 2-3
Table 2-2. Required Equipment
•
#0 Phillips screwdriver, preferably magnetized.
•
Small flat-blade screwdriver.
Table 2-3. Recommended Screw Torques
Screw Thread Size Torque (cm-kgf) Torque (in-lbf)
M2 1.3 – 1.8 1.1 – 1.5
M3 3.0 – 3.5 2.6 – 3.0
Caution
Be careful not to overtighten screws that go directly into magnesium components, or you could
strip the threads in the magnesium.