HP DesignJet 500 - Printing Three Additional Copies of a Job that has Already been Printed

20 Examples of How to Use the Front Panel
Printing Three Additional Copies of a Job that has Already been Printed
This applies to HP Designjet 800 and 800ps
printers only; see page 23 for the HP
Designjet 500 plus, or 500 Series with an
Accessory card.
1 From the table on page 8, the menu
structure is shown as:
→ Queue/Copies
2 Starting from the main Paper menu, press
the Down key (∇) twice until Job
management ( ) is highlighted ( );
and then press Enter to enter the Job
management menu.