Page Format
Setting Page Size in the
Front Panel
Image Appearance Print Management Printer Configuration
Media & InkIntroduction Front Panel Other
Printer
Options
Index
Solutions
Controlling the Cutter
With roll media loaded, when any print job you have send to the printer completes, the roll is automatically cut and
the print job falls into the media bin. There may be a delay before the roll is cut due to the drying time you have
programmed or the printer has automatically selected.
In some situations you may not wish to cut the roll after each print job. Use the following procedure to control the
cutter. The front panel menu selections are:
Select (using the keys)
Then Press:
1. Paper menu Enter
2. Cutter Enter
3. ON or OFF Enter
To Next Page
Loading...