tell me about front-panel
messages
hp designjet
5500 series
welcome
how do I ...
tell me about ...
the problem is ...
legal notices
glossary
index
See also status codes and error messages.
Status Description Procedure
A factory media
cannot be deleted.
You cannot delete this
printing material because it
is one of the HP-supported
types that was added at
the factory.
See
how do I download
media profiles?.
Calibrate error The calibration the printer
was performing has failed.
Note down the calibration
error code that comes
with this message, and
which calibration failed,
and contact your HP
representative.
Calibration cancelled The printer was performing
a calibration and you
pressed the Cancel key on
the front panel.
If the printer was
performing a calibration
to correct an internal
error, the correct
functioning of the printer
may be affected.
Calibration Error
XXXX
Press Enter to
Continue
The printer was calibrating
and failed to complete the
calibration. The front panel
shows an error code,
represented here by XXXX.
Press Enter to continue.
You can continue to
print; but, if the printer
was performing a
calibration to correct an
internal error, the correct
functioning of the printer
may be affected.
Cancelling firmware
upgrade. Please wait.
You are downloading new
firmware and the action
has been canceled.
This may be because the
firmware/software you
are attempting to
download is older than
the version you already
have, or the version is
not compatible with your
printer. See
how do I
upgrade my printer's
software?
Delete media profile? You are about to delete the
profile that you have in the
printer for a specific
printing material.
See
how do I download
media profiles?.
file:///C|/Documents%20and%20Settings/---/Desktop/HP/html/p0151.htm (1 of 8) [8/5/2002 4:23:08 PM]
To Next Page
Loading...