how do I perform accuracy
calibration?
hp designjet
5500 series
welcome
how do I ...
tell me about ...
the problem is ...
legal notices
glossary
index
Your printer was calibrated at the factory to ensure that it operates with the
greatest accuracy in normal environmental conditions. If you are operating
under significantly different conditions, you should recalibrate the printer as
explained here. You may also need to recalibrate the printer if you are using
non-HP printing materials or if you are experiencing image quality problems
for some other reason. Before recalibrating the printer, you should always
use the
image quality print to verify that you do actually have image quality
problems caused by media advance problems.
Note: the accuracy calibration applies only to the media type currently
selected in the front panel. Other media types will keep their original media
advance settings.
See also
environmental specifications.
To perform accuracy calibration, watch the animation below.
to restore the original calibration
If you notice after calibration that your image quality is worse than before,
you can return to the original settings: choose Utilities > Calibrations >
Accuracy > Restore Factory.
file:///C|/Documents%20and%20Settings/---/Desktop/HP/html/p0091.htm (1 of 2) [8/5/2002 3:29:42 PM]
To Next Page
Loading...