the print is distorted or
unintelligible
hp designjet
5500 series
welcome
how do I ...
tell me about ...
the problem is ...
legal notices
glossary
index
● The interface cable connecting your printer to your network (or to your
computer) could be faulty. Try another cable.
● If you have connected your computer to the parallel port on the
printer, make sure you are using a genuine HP parallel interface cable.
● If the front-panel graphics language setting is Automatic (the default),
try the other settings: PostScript for a PostScript file, HP-GL/2 for an
HP-GL/2 file etc. Then send the file again.
● Depending on the software, drivers, and RIPs you are using with your
printer, there will be different ways of solving this problem. Refer to
the vendor's user documentation for details.
© 2002 hewlett-packard company
file:///C|/Documents%20and%20Settings/---/Desktop/HP/html/p0107d.htm [8/5/2002 3:36:27 PM]
To Next Page
Loading...