The following information is displayed, subject to change in most cases:
printer configuration
All the settings on this page, apart from Max. number of logged jobs, are
also available from the front panel of the printer. Changing the setting on the
front panel will change the settings in WebAccess (and vice versa).
Max. number of logged jobs The maximum number of jobs that are logged
on the accounting page (you can change this
number up to a maximum of 500).
Disk capacity (Mbytes) The printers hard disk capacity.
Graphics language The graphics language currently being used for
print jobs .
Margins Whether normal or expanded margins are being
used
Nesting Whether nesting is enabled. Note that if you
enable nesting, "Start printing" will be set to
"After processing".
Queuing Whether queuing is enabled.
image quality
RGB ink emulation The type of RGB color emulation currently in use.
CMYK ink emulation The type of CMYK color emulation currently in use.
file:///C|/Documents%20and%20Settings/---/Desktop/HP/html/p0010b.htm (6 of 9) [8/5/2002 2:30:04 PM]
To Next Page
Loading...