Page 18 of 19
time for jobs to print in line at the queue.
Job Retention
(LJ feature)
This feature provides job retention options such as a private job and a hold job. Users
will be able to ensure that they are present during printing to provide privacy for
documents in the printer output bins.
Multicast DNS (mDNS) Also known as Bonjour or Rendezvous, mDNS uses IP multicast with DNS to provide
the capabilities of a DNS server for service discovery in a small network that does not
have a DNS server.
PJL Password
(LJ feature)
The PJL password feature helps protect the printer from unauthorized configurations
through Print Job Language (PJL) commands. It does not affect ordinary print jobs.
Once the PJL password is configured, the MFP requires it before it will process any of
these commands
Remote Firmware
Upgrade
(LJ feature)
This service allows an administrator to use a custom application to upgrade the
printer’s firmware remotely. Since HP recommends using HP Web Jetadmin to
upgrade MFP firmware, you should disable Remote Firmware Upgrade.
Simple Network
Management Protocol
(SNMP)
This is a network monitoring and control protocol.
SNMPv3
SNMP (Simple Network Management protocol) allows users to manage the printer
using SNMP management tools, such as HP Web JetAdmin. SNMP is also the protocol
for communicating to the printer with the Windows driver. SNMPv3 provides security
through user authentication and data encryption
Subnet A logical division of a local area network, which is created to improve performance
and provide security. A subnet limits the number of nodes that compete for bandwidth.
Authentication
Manager
(LJ feature)
It allows administrators to secure Device Functions by requiring users to log in with a
specific Log In Method for each Function. For example, users may be required to log in
with an Access Code or PIN to make copies yet be required to log in with a username
and password to send e-mails.
Log In Methods: The following Log In Methods are available with the latest device
firmware upgrade:
• Group 1 PIN: Requires users to input a numeric code for access when at the
control panel of the device. The numeric code entered by the walk-up user is
compared to the first of two PINs stored on the device by the Administrator.
When the PIN is entered correctly, the user can proceed.
• Group 2 PIN: Requires users to input a numeric code for access when at the
control panel of the device. The numeric code is compared to the second of
two PINs stored on the device by the Administrator.
• LDAP: Lightweight Directory Access Protocol, Requires users to input a
username and password that are verified by an LDAP server.
• HP Digital Send Service (if available): Also known as DSS. Requires users to
enter credentials that are verified by the HP Digital Send Service software. (HP
Digital Send Service software must be available to use this Log In Method. If
no DSS server is associated with this device, walk-up users will not be required
to authenticate before using the device.)
• Kerberos: Requires users to enter a username and password to be verified by
a Windows Server
To Next Page
Loading...