14. Open the ink filter cover.
15. Remove the old ink filter and insert a new one.
16. Close the ink filter cover.
17. Close and lock the window.
Replace a printhead
Remove a printhead
1.
On the printer's front panel, select the
icon, then select Replace printheads.
2. The carriage moves to the removal position.
CAUTION: If the carriage remains in the removal position for more than 3 minutes without inserting or
removing any printheads, it will attempt to return back to its home position to the right.
30 Chapter 4 Hardware maintenance ENWW
To Next Page
Loading...