HP DesignJet Series - Page 143

7-11
Removal and Installation
HP Designjet Ultra Low End Printer Service Manual
Left End Cover
Removal
Switch off the product and remove the power cable.
1. Remove the Center Cover
⇒ Page 7-7 .
2. Disconnect the Front Panel cable from the
rea
r of the Printer.
Following steps 3, 4 and 5 not
applicable to 10ps,20ps, 30, 30n,
50ps
3. Remove 1 T-10 screw from the Rear Left
Trim.
4. Remove the Rear Left Trim from the Printer.
Disconnect