Need help?Do you have a question about the HP DesignJet Z2100 and is the answer not in the manual?
General| Print Technology | Thermal Inkjet |
|---|---|
| Maximum Print Resolution | 2400 x 1200 dpi |
| Ink Types | Pigment-based |
| Number of Inks | 8 |
| Maximum Print Width | 44 inches |
| Ink Colors | Cyan, Magenta, Yellow, Light Cyan, Light Magenta |
| Media Sizes Supported | Up to 44-inch wide media |
| Media Types | Photographic, fine art printing material, self-adhesive, bond and coated, backlit, film |
| Connectivity | Ethernet, USB 2.0 |
| Operating Systems Supported | Windows, Mac OS X |
Precautions to take when dealing with electrical shock hazards.
Precautions to prevent damage from electrostatic discharge.
Explains system error codes, their descriptions, and corrective actions.
Built-in tools for printer diagnostics and maintenance procedures.
Procedures for calibrating printer components for optimal performance.
Step-by-step guides for removing and installing printer parts.
Overview of the printer's front panel controls and functions.
Steps to resolve printer issues indicated by system error codes.
Addresses issues where parts of the printed image are cut off.
Troubleshooting steps when the output is incomplete.
General steps to improve or fix print quality problems.
Troubleshooting guide for banding issues in prints.
Information on using the internal image quality diagnostic tool.
Procedures for printing diagnostic tests for quality assessment.
Analyzes printhead nozzle performance and reliability.
Checks color-to-color and bi-directional printhead alignment.
How to interpret paper advance diagnostic plots.
Procedures for generating advanced diagnostic prints.
Basic information about the printer's ink cartridges and printheads.
Safety guidelines for handling ink cartridges and printheads.
Procedures for checking and replacing ink cartridges.
Step-by-step instructions for replacing printer printheads.
Critical procedure for ensuring accurate color and sharp edges.
Procedures for cleaning printheads to ensure optimal performance.
Concise explanations of system error codes and their components.
Detailed explanations and corrective actions for system error codes.
List and procedures for diagnostic tests available on the printer.
Details on the printer's front panel interface and controls.
Steps to access the printer's diagnostic test menus.
Steps to access the printer's service calibration menus.
Calibrates the line sensor intensity and PWM check.
Calibrates media advance for precise movement.
Calibrates the drop detector for accurate ink drop detection.
Basic information on printer parts and diagrams.
Exploded view and part list for the carriage assembly.
Procedure to remove and install the printer's window.
Procedure to remove and install the rear media tray.
Procedure to remove and install the printer's cutter assembly.
Procedure to remove and install the printer's service station.
General instructions for cleaning the printer's exterior and components.
Instructions for lubricating the carriage assembly for optimal operation.
Information about available preventive maintenance kits.
To Next Page
