Need help?Do you have a question about the HP Z2100 - DesignJet Color Inkjet Printer and is the answer not in the manual?
General| Print Technology | Thermal Inkjet |
|---|---|
| Maximum Print Resolution | 2400 x 1200 DPI |
| Number of Ink Cartridges | 8 |
| Ink Cartridges | HP 70 Ink Cartridges |
| Ink Types | pigment-based |
| Media Sizes Supported | A4, A3, A2, A1, A0 |
| Media Types | Bond and coated paper |
| Connectivity | USB 2.0 |
| Internal Storage | 80 GB HDD |
| Print Margins | 5 x 17 x 5 x 5 mm |
| Weight | Approx. 120 lbs (54.4 kg) |
| Acoustic Power Emission | 6.8 B(A) |
| Operating Systems Supported | Windows, Mac OS |
Access the HP Color Center and launch the printer utility.
Select "Create and Install ICC Profile" from the utility menu.
Specify a name and type for your new custom paper.
Choose to print/scan charts and configure profile creation settings.
Load paper and initiate the printer calibration sequence.
Print, dry, and scan the test chart for color measurement.
Confirm profile creation and locate the installed profile file.
Access information on HP Designjet products via the website.
To Next Page
