HP Z3200 - DesignJet Color Inkjet Printer User Manual

Read these instructions carefully...
What you will need for this
procedure
• Because the printer is heavy, you may
need three people to unpack it. When
more than one person is needed, this
symbol is displayed.
• To assemble the printer you will need at
least 1 x 2 m (40 x 80 in) of empty floor
space.
*Whenever you see this icon, you can find
an animation illustrating the procedure on
the HP Start-Up Kit DVD.
Printer working area
Before you start unpacking, consider where
you are going to put the assembled printer.
You should allow some clear space on all
sides of the printer box. The recommended
clearances are shown in the illustration
above.
Note: If your printer is 24-in without
stand, remove the printer box
and the accessories box, place
the printer on a table and remove
the desiccant bag from below the
printer. Then go to step 32.
HP Designjet
Z2100, Z3200 and
Z3200ps
Photo Printer Series
Assembly Instructions
© 2008 Hewlett-Packard Company
Inkjet Commercial Division
Avenida Graells 501 · 08174
Sant Cugat del Vallès
Barcelona · Spain
All rights reserved
Printed in Germany · Imprimé en Allemagne · Stampato in Germania
1 2
*
1.2 set up troja Asia NEW.indd 1 26/06/2008 11:16:04 AM

HP Z3200 - DesignJet Color Inkjet Printer Specifications

General

Print Technology	Thermal Inkjet
Maximum Print Resolution	2400 x 1200 dpi
Ink Types	Pigment-based
Number of Inks	12
Memory	256 MB
Ink Palette Supported (Colors)	light cyan, light magenta, gray, photo black
Ink Cartridge Capacity	130 ml
Media Sizes Supported	Up to 44 in wide rolls
Media Types	Bond and Coated Paper, Photo Paper, Self-Adhesive, Film
Connectivity	USB 2.0, Ethernet
Operating Systems Supported	Windows, Mac OS
Dimensions (W x D x H)	1770 x 721 x 1050 mm