Remove the accessories from the printer box.
You will find the documentation and soft-
ware for your printer on top of the printer.
Remove the stand box, which is the largest
one. To do so you may need two people,
one at each end.
Lift up the sides and top of the printer box,
and remove them from the printer.
Remove the pieces of cardboard.
Cut and remove the straps around the
stand box.
Remove the roll of paper.
Remove the rear tray from the printer.
Note: If you don’t find the tray
in the box, it may already be
installed.
3 4 5 6
7 8 9
Unpack the printer
10
Open the stand box.
To Next Page
Loading...