The front panel will display a series of
messages showing the progress of the
printhead alignment. There is no need to
take any action until the alignment has
finished, when you will see the message
shown below. Press the OK key.
84
The front panel will ask whether you are
loading roll or sheet paper. The printer will
proceed to align the printheads. This proc-
ess involves printing, and therefore needs
to use some paper.
83
You can now, or at some later time, color-
calibrate the paper type that you intend
to use in the printer. Color calibration is
recommended for accurate color printing.
It can be started from the Printer Utility
program installed as part of your printer
software, or from the front panel’s Image
Quality Maintenance menu.
85 86
1- View ink levels
2- View loaded paper
3- Unload paper
4- Form feed and cut
5- Back
6- Menu
7- Power
8- cancel
9- OK
1
2
4
3
5
6
7
89
To Next Page
Loading...