Connect the power cable to the printer’s
power socket.
Switch on power to the printer using the
switch just above the power socket.
Remove the plastic film covering the
window and the plastic film covering the
front panel (LCD display).
51 52 53
Install the ink cartridges
Connect a USB cable to the appropriate
socket on the rear right of the printer, and
secure the cable with the clip provided, to
prevent accidental unplugging.
On the front panel, the HP logo appears.
Please wait a while. You will then be
prompted to select the language of the
printer.
54
57
Shake each ink cartridge for about
10 seconds before unwrapping it.
Open the cover on the right-hand side of
the printer.
56
Then the printer checks for the presence of
ink cartridges. On finding none, it prompts
you to install the ink cartridges.
55
Insert the ink cartridges one by one. Each
cartridge is marked with its own color, and
should be inserted only into the slot of the
same color. Avoid touching pins, leads or
circuits.
58
To Next Page
Loading...