Designjet Z Series — Service Manual 3-53
Service Tests (Diagnostics)
4 The Front Panel shows the result of the test.
5 Press any key to continue.
6 The Front Panel shows the test complete display for a few seconds.
7 The Front Panel prompts you to shutdown the printer to complete the test.
8 Press any key to shutdown the printer.
11. E E R O M R e s e t
The EEROM Reset removes all contents and print jobs from the queue and all
accounting information is reset. After an EEROM Reset, the printhead
alignment and color calibrations become obsolete.
Custom paper types, ICC profiles, and usage information, such as the life
counters for printer components or Preventive Maintenance Kits, are kept
after an EEROM Reset (they will not be deleted).
After an EEROM Reset, the printer will automatically purge the tubes and
perform a printhead alignment. This process can take some time. Make sure
to plan ahead.
1 In the Diagnostics menu, scroll to 11. E E R O M and press OK.
To Next Page
Loading...