Service Tests and Utilities
3-52 Designjet Z Series — Service Manual
3 The Front Panel displays the I/O Information.
4 Press any key to finish.
5 The Front Panel shows the test complete display for a few seconds.
6 The Front Panel prompts you to shutdown the printer to complete the test.
7 Press any key to shutdown the printer.
10. Unit Information
1 The Unit Info test recovers the Firmware Version, Serial Number and Part
Number of the printer.
2 In the Diagnostics menu, scroll to 10. U n it Informa tion and press OK.
3 The Unit Information test starts and the front Panel displays the following
message:
Starting Horsburgh and Mips.
Starting Nvm.
Getting FW version.
Getting Serial Number
Getting Part Number.
To Next Page
Loading...