Designjet Z Series — Service Manual 2-5
System Error Code Brief Descriptions
Corrective Actions Table
The following table explains the YZ part of the System Error Code or
Warning:
85 Media-axis encoder reading
86 Carriage Movement
87 Scan-axis encoder reading
93 Ink Pumping
94 Color calibration
94.1 Profiler
95 Printhead alignment
97 Paper advance calibration
Code Recovery Action Response
00 Replace
Possible for
customer to
perform
action
01 Reseat/Reconnect/Clean/Adjust (manually)
02 Calibrate/Adjust (using Automatic Process)
03 Power OFF and Restart the Printer
04 Upgrade System Firmware
05 Upgrade Driver or Computer Software
06 Add Accessory
07 Escalate
08 Send Plot Again
09 Wrong Part Installed
Code Component/System
To Next Page
Loading...