Designjet Z Series — Service Manual 3-51
Service Tests (Diagnostics)
12 The Front Panel shows the test result.
13 Press any key to finish.
14 The Front Panel shows the test complete display for a few seconds.
15 The Front Panel prompts you to shutdown the printer to complete the test.
16 Press any key to shutdown the printer.
9. I/O Information
The I/O Information test retrieves the TC/IP Network configuration
parameters from the printer.
1 In the Diagnostics menu, scroll to 9. I/O Information and press OK.
2 The I/O Information test starts and the front Panel displays the following
message:
Getting IO interface.
Getting Interface info.
To Next Page
Loading...