Designjet Z Series — Service Manual 3-41
Service Tests (Diagnostics)
20 The Front Panel then displays Acumen Supplies test results.
21 The Front Panel shows the test complete display for a few seconds.
22 The Front Panel prompts you to shutdown the printer to complete the test.
23 Press any key to shutdown the printer.
Check Ink Supplies
1 In the Diagnostics menu, scroll to 7. I DS and press OK.
2 The Front Panel will show the 7. IDS submenu.
3 In the IDS submenu, scroll to Check Ink Supplies and press OK to start
the test.
4 The Check Ink Supplies test starts and the front Panel displays the following
messages:
Starting Horburgh & Mips.
Starting Nvm.
To Next Page
Loading...