Designjet Z Series — Service Manual 1-41
Troubleshooting Print Quality Problems
Lines are Printed Double or in Wrong Colors
Description of problem
This problem can have various visible symptoms, as shown below:
Corrective Action
1 Reseat the Printheads by removing them and then reinserting them.
Lines are discontinuous
If the lines are broken in the following way:
1 Check that the appropriate print quality settings are being used (refer to the
User’s Guide for more information).
2 Reseat the Printheads by removing them and then reinserting them.
As you reseat the printheads, the printer will automatically
align the printheads. It is important that the alignment is
completed properly, see
Aligning Printheads
, Page 1-66
As you reseat the printheads, the printer will automatically
align the printheads. It is important that the alignment is
completed properly, see
Aligning Printheads
, Page 1-66
To Next Page
Loading...