Designjet Z Series — Service Manual 3-1
Service Tests and Utilities 2
Introduction 3-2
Diagnostics - Self Test 3-2
Service Tests (Diagnostics) 3-3
Using the Front Panel 3-5
Entering the Diagnostic Tests Menu 3-6
1. Scan Axis 3-6
2. Paper Drive 3-18
3. Electronics Module 3-22
4. Carriage Assembly 3-27
5. Sensors 3-33
6. Color Sensor ESP (spectrophotometer) 3-36
7. Ink Delivery System (IDS) 3-38
8. Service Station 3-45
9. I/O Information 3-51
10. Unit Information 3-52
11. EEROM Reset 3-53
12. Set Unit Configuration 3-55
13. Error 71:19 Recovery 3-55
14. Others 3-58
Service Utilities 3-59
Entering the Service Utilities Menu 3-59
1. Tu r n D r i v e Ro l l e r 3 - 61
2. Purge Tubes 3-62
3. Set SN 3-65
4. Reset Life Counters 3-66
5. Diagnostic Print 3-67
6. Set Date and Time 3-68
7. Enable/Disable Firewall 3-69
3