HP DesignJet Z5200 series

Chapter contents
Troubleshooting
troubleshooting page is simply a guide / additional information for your convenience, as you search for
assistance in repairing your machine. Although this information is provided for your convenience it is
recommended, for the most part, that a technician inspects your office equipment.
It is recommended to consult with a professional when ordering your printer part(s).
Shop with us while you troubleshoot.
* HP oem parts
* HP LaserJet maintenance kits
* Toners for your printer
* HP fuser assembly units
* HP fuser kit 110v & 220v
* Parts assemblies for printers
* Service maintenance parts
* Color laserJet printers
* LaserJet printers and parts
* Hard to find officejet parts
User-friendly SmartSearch!
* Hard to find deskjet parts
To better help our customers - this DesignJet Z5200 series
.........
Removal and Installation
www.Partshere.com Partshere Troubleshooting
Service Calibration Guide to Removal and Installation
Window
Front Cover
Media Output Assembly
Right Front Trim
Left Front Trim
Right Ink Cartridge Door
Left Ink Cartridge Door
Right Cover
Left Cover
Rear Tray
Rear Cover
Media Lever
Media Lever Position Sensor
Cutter Assembly
Right Rear Tray Support
Left Rear Tray Support
Front Panel
Top Cover
Window Position Sensor
Ink Supply Tubes Support Rail
Service Station

HP DesignJet Z5200 series Specifications

General

Print Technology	Thermal Inkjet
Number of Inks	8
Memory	32 GB (virtual)
Hard Drive	160 GB
Maximum Print Resolution	2400 x 1200 optimized dpi
Model Size	44 in
Print Speed	41 m²/hr
Connectivity, standard	Gigabit Ethernet (1000Base-T)
Print Languages	HP-GL/2, HP-RTL, TIFF, JPEG, CALS G4
Roll External Diameter	150 mm
Media Types	Bond and coated, backlit, self-adhesive
Line Accuracy	+/- 0.1%
Connectivity	Gigabit Ethernet (1000Base-T)

Summary

Printer Maintenance Safety and Introduction

Introduction to Removal Procedures

Explains the purpose and scope of printer component removal guides.

General Safety Precautions

Essential warnings and guidelines for safe printer servicing.

ESD Precautions

Procedures to prevent damage from electrostatic discharge.

Service Calibration and Tool Requirements

Required Tools for Repair

Lists the necessary tools for printer disassembly and maintenance.

Service Calibration Guide

Information on post-replacement service calibrations.

Service Calibration Matrix

Mapping of components to required diagnostic tests and calibrations.

Component Removal Procedures

Window Removal

Step-by-step guide for removing the printer window.

Front Cover Removal

Instructions for safely removing the printer's front cover.

Right Cover Removal

Detailed steps to detach and remove the right side cover.

Left Cover Removal

Detailed steps to detach and remove the left side cover.

Service Station Removal

Procedure for accessing and removing the printer's service station.

Carriage Assembly Removal

Guide for removing the main carriage assembly and its components.

Electronics Module Removal

Steps to remove the main PCA and Power Supply Unit (PSU).