2-27
System Error Codes
HP Designjet Ultra Low End Printer Service Manual
System Error Codes - Explanation
System Error Codes explain which component/system is failing and what
action should be taken to resolve the problem.
System Error Codes are displayed directly on the front panel (but can
also be seen on the Information Page) and have been defined in the format
XX.YZ.
Warnings will not be displayed on the front panel, but will instead only
appear on the Information Page and have been defined in the format
XXn.YZ.m.
XX: Service Part (2 digits).
n: Service Part Index (if more than one used in the product) - Optional.
– e.g. Identify the Ink Supply (color and number).
Y: Who should perform the action (1 digit) - (User or Service Engineer).
Z: Action to perform (1 digit).
m: additional actions/information to consider (1 digit) - Optional.
– e.g. Non-authorized ink was detected, PM was triggered or Printhead
in/out of Warranty.
The following table explains the
XX
part of the System Error Code or Warning:
Code Component/System
01 Main PCA/Electronics Module
02 Carriage/Carriage PCA
03 Power Supply Unit
04 Network Card
05 Formatter
06 Hard Disk Drive
07 Interconnect PCA
08 Front Panel
11 Trailing Cable
12 Carriage Flex Circuit
17 Interconnect Cable
21 Service Station
22 Ink Supply Station
23 Pressure System (APS)
24 Ink Delivery Tubes
25 Spittoon
26n Ink Cartridge (color n)
26n Printhead (color n)
31 Cutter
32 Take-up Reel
33 Sheet Feeder
Items in red are
not applicable
to the printers.
To Next Page
Loading...