HP DesignJet Series - Reset Jetdirect Network Card

3-13
System Maintenance Utility
HP Designjet Ultra Low End Printer Service Manual
Reset Jetdirect Card
Use this function to reset the HP Jetdirect card configuration to the factory
defaults. This should only be used if the HP Jetdirect card is not responding
and no other recovery method works.
Any user configuration information, for example the IP address, will be lost.
In this c
a
se the system maintenance utility will not be able to communicate
with the printer using the network.
The HP Jetdirect card will need to be reconfigured, using WebJetAdmin for
e
x
ample, after this reset.
Step 1 - Select "reset jetdirect card"
Step 2 - Press "reset jetdirect"