System Error Codes
2-7 HP Designjet T Series — Service Manual
System Error Code Brief Descriptions
Reading a System Error Code
System Error Codes explain which component/system is failing and what
action should be taken to resolve the problem.
System Error Codes are displayed directly on the front panel (but can also be
seen on the Information Page) and have been defined in the format XX.YZ.
or XX.n:YZ.m.
XX: Can be a malfunctioning subsystem or process (2 digits).
n: Subsystem or process Index (if more than one used in the product) -
Optional.
– e.g. Identify the Ink Supply (color and number).
Y: Who should perform the action (1 digit) - (0 for User or1 for Service
Engineer).
Z: Action to perform (1 digit).
System Error Code Table
The following table explains the XX part of the System Error Code or
Warning:
Code Component/System
01.0 Main PCA/Electronics module
01.1 Add-on Electronics module (printmech)
01.2 Print Mech PCA
02.1 Carriage PCA
03 Power supply
06 Formatter
08 Formatter/Front panel
11 Trailing cable
21 Service station
21.1 Service station
22.0 Bongo error BPS0 (ISS Left)
22.1 Bongo error BPS1 (ISSLeft)
24 Tube assembly (IDS)
26.n Ink Cartridge (color = n)
27 Printhead error
31 Cutter
38 Output Tray
41 Paper-axis motor
41.1 Paper-axis motor
To Next Page
Loading...