HP Designjet T1100 Series - Page 80

HP Designjet T Series — Service Manual 2-20
System Error Codes - Full Descriptions
HP D esig n jet T610 P rint er: Q 6711- 60024 (or a ny form at te r se r vic e ki t
including fw 6 or superior)
 If the printer was manufactured before mid-February, 2008 perform the
standard troubleshooting procedure above.
System Error: 45:YZ
Problem
Description:
An error with the Rewinder System has been detected.
Corrective Action: Try the following:
1 Switch the Power OFF from the back of the Printer and disconnect the Power
cord. Reconnect the power cord and power On the Printer.
2 Check that the Rewinder cable is not damaged and is correctly connected to
the PrintMech PCA.
3 Check that the Right Spindle Holder (rewinder included) is correctly attached
to and aligned with the Right Cover.
4 Perform the Rewinder diagnostic test to troubleshoot the problem further. See
6. Rewinder on page 3-34.
5 Replace the Right Spindle Holder (rewinder included). See Right Spindle
Holder and Rewinder (T1120/T1120ps/T620) on page 6-87 or Right Spindle
Holder and Rewinder (T1120/T1120ps/T620) on page 6-87.
6 If the System Error continues, replace the PrintMech PCA. See PrintMech
PCA (T1100, T1100ps, T610 ONLY) on page 6-73.
System Error: 47:03
Problem
Description:
Star wheels motor error.
Corrective Action: Try the following:
 Same as 47:YZ. The error is continuable, but only if it happens from time
to time.
System Error: 47:YZ
Problem
Description:
Star wheels motor error.
Corrective Action: Try the following:
1 Switch the Power OFF from the back of the Printer and disconnect the Power
cord. Reconnect the power cord and power On the Printer.
2 Check that the Starwheel Assembly cable is not damaged and is correctly
connected to Main PCA.
3 Open the Window and check for any visible obstacles restricting the
movement of the Starwheel Assembly, then clear the obstruction.
4 Perform the Scan Axis Starwheel diagnostic test to troubleshoot the problem
further. See
Star Wheel Lifter test on page 3-7.
5 Replace the Starwheel Motor. See Starwheel Motor on page 6-251.