HP Designjet T1100 - Page 131

HP Designjet T Series — Service Manual 3-23
Service Tests (Diagnostics)
9 The Front Panel then displays the Fan Speed test result and prompts you to
press any key to continue.
10 Press any key to continue.
11 The Front Panel then prompts you to test the Formatter.
12 Press OK to the test the Formatter. If you do not wish to test the Formatter use
the Arrow keys to select NO and press OK.
13 The Formatter voltage test starts and the front Panel displays the following
me
ssages:
 Starting DelSol1.
 Getting PCA revision.
14 The Front Panel then displays PCA Rev. Voltage test result and prompts you to
pr
ess any key to continue.
15 Press any key to continue.
16 The Formatter memory size test starts and the Front Panel displays the
f
ollowing messages:
 Getting Memory Size.
17 The Front Panel then displays Formatter Memory Size and prompts you to
pr
ess any key to continue.
18 Press any key to continue.