HP Designjet T Series — Service Manual 3-25
Service Tests (Diagnostics)
29 The Front Panel then displays Main Memory size test results and prompts you
to press any key to continue.
30 Press any key to continue.
31 The Front Panel then prompts you to test the Formatter Communications.
32 Press OK to the test the Formatter. If you do not wish to test the Formatter use
the Arrow keys to select NO and press OK.
33 The Formatter Communications test starts and the front Panel displays the
f
ollowing messages:
Starting Micci2Bus.
Starting Micci2BusProxy.
Checking Communications.
34 The Front Panel then displays Formatter Communications test results and
pr
ompts you to press any key to continue.
35 Press any key to continue.
36 The Front Panel then prompts you to check the Plotter Information.
37 Press OK to the check the Plotter Information. If you do not wish to test the
Plotter Information use the Arrow keys to select NO and press OK.
38 The Plotter information test starts and the Front Panel displays the following
me
ssages:
To Next Page
Loading...