Service Tests and Utilities
3-44 HP Designjet T Series — Service Manual
9 The Front Panel then asks if you want to cap the Service Station.
10 Select YES to cap the Service Station or NO to skip this test.
11 The test continues and displays the following messages:
Capping Service Station.
12 The Front Panel displays the Service Station test results.
13 Press any key to finish the test.
14 The Front Panel shows the test complete display for a few seconds.
15 The Front Panel prompts you to shutdown the printer to complete the test.
16 Press any key to shutdown the printer.
Primer Motor
1 In
the Diagnostics menu, scroll to 8. Ser
vice Station and press OK.
To Next Page
Loading...