Service Tests and Utilities
3-46 HP Designjet T Series — Service Manual
6 The Front Panel prompts you to shutdown the printer to complete the test.
7 Press any key to shutdown the printer.
Aerosol Fan
The Aerosol Fan diagnostic test is only available for printers
that include an aerosol fan.
1 In the Diagnostics menu, scroll to 8. Service Station and press OK.
2 The Front Panel will show the 8. Service Station submenu.
3 In the 8. Service Station submenu, scroll to Aerosol Fan and press OK
to start the test.
4 The Aerosol Fan test starts and the front Panel displays the following
me
ssages:
Starting Horsburgh and Mips.
Starting Nvm.
Starting TestsGpio.
Getting Part number.
Reading Aerosol Fan.
5 The front Panel then prompts you switch on the Aerosol Fan.
To Next Page
Loading...