HP Designjet T Series — Service Manual 4-9
Service Calibrations
prevent any back tension which could cause any media advance problems.
Press the OK key to continue.
11 The Printer advances and reels in about a meter of paper. The Front Panel
displays the following messages:
Advancing Paper
Printing Pattern
12 The Printer will start to print the Paper Advance Calibration Pattern. This
could t
ake several minutes during which the following message will be
displayed on the Front Panel.
13 Once the Accuracy Calibration Pattern has been printed successfully, the
Front panel will prompt you to continue.
14 Press the Enter key to continue.
15
If you used roll media to print the Paper Advance Calibration, the Printer detects
that media is loaded, and prompts you to lift the Media Lever.
16 Raise the media lever.
To Next Page
Loading...