HP Designjet T1120

The printer's main features
Your printer is a color inkjet printer designed for printing high-quality images on paper up to 24 inches
(61 cm) or 44 inches (1.12 m) wide depending on your printer's width. Some major features of the printer
are shown below:
●
Print resolution of up to 2400 × 1200 optimized dpi, from a 1200 × 1200 dpi input, using the Best
print-quality option, the Maximum Detail option and photo paper
●
The HP Printer Utility, see
Access the HP Printer Utility on page 29, provides an easy-to-use
interface including:
◦
Job management, see
Job queue management on page 103
◦
Calibration of printer
◦
Access to the online HP Knowledge Center
●
Accurate and consistent color reproduction with automatic color calibration
●
Economode for printing economically
●
Six-ink system
●
Color emulations, see
Printer emulation on page 70
●
High productivity features such as job previewing and nesting using the HP Printer Utility or the
printer's Embedded Web Server
●
Ink and paper usage information available from the Web from the Embedded Web Server, see
Access the Embedded Web Server on page 29
●
Paper flexibility and automatic easy load, see
Paper handling on page 33, with information and
profiles accessible from the front panel and the HP Printer Utility
The printer's main components
The following front and rear views of the printer illustrate the main components.
4 Chapter 1 Introduction ENWW
Introduction