HP Designjet T1120

Color management from the front panel
You can color-calibrate the loaded paper type from the front panel by selecting the Image Quality
Maintenance menu icon
, then Calibrate color. See Color calibration on page 68.
The other color options in the front panel can all be found by selecting the Setup menu icon
,
then Printing preferences > Color.
NOTE: These front panel settings can all be overridden by the printer driver or Embedded Web Server
settings.
T1120 and T1120ps options
●
Color/Grayscale: you can choose to print in color or in shades of gray. Default: Print in color.
●
Select RGB source profile: you can choose from a selection of RGB source profiles recognized
by the printer. Default: sRGB (HP).
●
Emulate printer: you can choose to emulate a different HP Designjet printer. Default: None (no
printer emulation).
TIP: If you have old HP-GL/2 or PostScript files made for a different HP Designjet printer, you
can send them to the printer and use the front panel to turn on the appropriate emulation mode.
76 Chapter 7 Color management ENWW
Color management