HP Designjet Printer Series Security Settings
20
rule specifies the IP addresses and services allowed by the print server and device. To add a rule, click ‘Add Rule’. This
setting runs a wizard that will help you configure each rule.
IPsec / Firewall. Use this page to view or configure an IPsec / firewall policy. An IPsec / firewall policy consists of up to
10 rules. As with a firewall policy, each rule specifies the IP addresses and services allowed by the print server and
device. With IPsec support, you can apply IPsec authentication and encryption protocols for those addresses and
services. To add a rule, click ‘Add Rule’. This runs a wizard that will help you configure each rule.
For a detailed description of wizard settings and additional help, click Jetdirect IPsec/Firewall Help
.
3.9 SNMPv3
You can enable and disable the SNMP v3 agent from your printer. You may set up an account that allows a
management application to access the SNMP v3 agent.
To Next Page
Loading...