HP Designjet - Software Update and Recovery; Updating Software or Recovering System

Software Update and Recovery
djcc-65.htm[28/10/2014 15:48:47]
you are here: welcome how do I...? recover the system or update software
HP Designjet Scanner
how do I...?
the problem is...
alphabetical index
how do I update the software or recover the system ?
to update the software or recover your system...
1. Press the Setup tab
2. Press Options > System > Advanced
3. Press the Update Software button
4. Confirm that you wish to enter the Software Update and
Recovery mode to proceed.
5. The system will shut down and restart automatically in recovery
mode - and present your options.
5. Follow the instructions on your screen.
6. After updating the software/ system recovery you must run
Calibration. See:
...how do I...
maintenance procedures
printing instructions legal information
© 2002-2014 Hewlett-Packard Company