how do I define scanner setup options?
djcc-71.htm[28/10/2014 15:48:52]
Select the Extended Thickness button
1. If the lines seem uneven, check the box labeled Enable
extended thickness handling.
2. Change the value for each of the scanner's camera pairs.
Normally, only positive values should be used.
3. Make test scans and readjust the values until you are satisfied
that the lines are stitched correctly.
4. Click OK to accept your settings.
printing instructions legal information
© 2002-2014 Hewlett-Packard Company
To Next Page
Loading...
